Keeping your car in excellent condition means finding out how to properly look after it. Car valeting not only allows you to keep your car looking terrific, but stops the car’s paint from becoming damaged by the problems of the climate.

The Tools and Techniques

Before you start, ensure you get rid of any sponges or worn out rags you currently own. You are going to require a woolen wash glove to replace them. It is crucial that you remember that you simply can’t just clean your car with anything. Woolen wash mitts are capable of holding additional water, but more importantly, they’re the right way to clean your vehicle without scratching it.

Along with your new woolen wash mitt, use a two bucket method. One of the buckets will contain clear, clean water and the additional should have the mixture for cleaning. When you are rinsing your wash mitt, use the clean water to make sure that you’re not moving the dirt back on top of the vehicle. This really boosts the performance of both the shampoo and water mixtures.

One more tip – be certain you have got a bucket guard. This easy plastic grate allows dirt to fall to the base of the bucket, but keeps it from being picked up again via the mitt. Finally, make certain you use a quality shampoo for optimum cleaning and protection, and that you have a PVA or microfiber drying towel handy.

Wash and Dry

Ensure you wash your car away from direct sunlight. Rinse your car completely initially, to help dislodge as much dirt as is possible. Start to wash your vehicle from the top and work your way lower. Work with a straight action with the wash mitt, overlapping a number of times to get rid of as much dirt as you can. Wash one place and then rinse it thoroughly. While rinsing, use a slow stream of water – avoid using any high force.

Start using two decent towels to dry your vehicle. Carefully stroke the surface of your car with the towel, rather than scrubbing it dry. The towels will carry a lot of the water so you will need to drain them often to allow them to be more helpful. The first of the two towels will take in the majority of the water. When it’s saturated, make use of the second towel to dry up any remaining water droplets on your car.

Polishing and Waxing

Polishing will be the next stage here. To get the best results you will need to work with a nonabrasive polish. You may also want to use a few various kinds to get the perfect shine. Polishing regenerates your car’s paint to a superior shine by getting rid of any small flaws.

A power car polisher may be used to make sure your polish is used the right way. It’s tough to produce the same results manually. Make sure to avoid hurrying while polishing. Work steadily and within 2 by 2 foot zones.

Finish off your polishing process by going side to side to guarantee the whole space is always coated. As you’re polishing, be sure the polisher’s pad is level all of the time – the side of the pad can harm your finish. Working with wax (have a decent artificial or carnauba wax) is much like polishing, and can be performed by hand or with the aid of the electric polisher. Hand waxing is often the better decision, though.

Following these pointers and actions can help guarantee that the exterior of your car is correctly valeted and presented in the very best condition at all times.

Looking to find the best car polishing results, then visit our Car Valeting HQ website and learn how to car valet like a professional.

Tags:

Filed under: Automotive

Like this post? Subscribe to my RSS feed and get loads more!